3.5 GHz RF Analog Fiber Optic Receiver
The MP-2320RX is a comprehensive family of RF/Fiber Optic Receivers that are designed to provide electrical-to-optical (E/O) conversion of broadband RF signals over a frequency range of 1.0 MHz to 3500 MHz. The receiver family can be optimized over a unique frequency range as indicated in the part number generator tool on page two. Further system optimization can be achieved by using the integrated RF attenuators which have a 30 dB adjustment range.
The utilization of the MP-2320RX, in conjunction with the appropriate MP- 2320TX RF/Fiber Optic Transmitter, forms a broadband link capable of supporting the transmission of RF signals over singlemode optical fiber for use in a wide array of communication applications. The link applications include antenna remoting, time and frequency reference distribution, RF delay lines, telemetry tracking, and point-to-point RF transmission.
The receiver utilizes a high speed, low distortion PIN photodiode detector that is integrated with a broadband RF post amplifier. The unit provides the user with status monitoring through the use of an onboard processor that communicates to a host computer over an RS-232 or RS-485 I/O interface. The I/O parameters include received optical power, temperature and alarm status.
In addition, the receiver’s post-amplifier gain can be adjusted using the integrated variable RF attenuator. The attenuator’s adjustment range is 0.0 dB to 35.0 dB in 0.5 dB increments. The receiver is also available without a RF post amplifier if required.
- Wideband RF Transmission
- Microwave Antenna Remoting
- L-Band SATCOM Links
- GPS Antenna Remoting
- Wireless/ PCS
- Phased array Antenna Systems
- Satellite Radio: XM
- 1.0 MHz to 3.5 GHz Bandwidth
- CWDM / DWDM Compatible
- Adjustable RF Front End Attenuator
- Low Noise Pre-amplifier
- High Dynamic Range
- Optional Integrated Bias-T
- Small Form Factor Flange Mount
- Hot Swappable, Plug-In Module
- Compatible with MPS-1911, MPS-1914, MPS-1915 Rack Chassis Systems
|Operating Wavelength||1200 nm to 1600 nm|
|Input Level (Max)||+5 dBm|
|Responsivity (min)||0.85A/W@1310 nm, 0.90 A/W @ 1550 nm|
|Input Backreflection||-55dB to -63 dB|
|Opt Fault Threshold||Factory preset to -12 dBm|
|Bandwidth||1 MHz to 3500 MHz|
|Gain (min)||28.0 dB|
|Flatness (max)||+/- 1.0 dB|
|1 dB Comp. Level (min)||+18.0 dBm|
|OIP-3 (min) @ 2×0 dBm||+28.0 dBm|
|Noise Figure (max)||3.0 dB|