Products
> Optical Link Systems >
OFW-1217
OFW-1217
Fiber Optic Antenna Link (FOAL)
Description
The OFW-1217L Inter Facility Link (IFL) is an analog fiber optic
modem designed to simultaneously transport up to four separate X-Band
SATCOM uplink and downlink signals between an earth station facility
and a remotely located antenna site via a multi strand optical cable.
The IFL is packaged in two, 19" rack mountable equipment chassis’
that serve as the interface units between the uplink and downlink
segments of the X-Band SATCOM system. The IFL uplink channel accepts
X-Band input signals (7.9 to 8.4 GHz) from the earth station facility
equipment while the downlink channel accepts X-Band input signals
(7.25 to 7.75 GHz) from the antenna site equipment. The IFL data
link operates over a primary and an auxiliary data channel at a
data rate of 38.4 Kbps. The IFL rack unit provides an RS-485 data
expansion port for additional IFL rack units to be cascaded to the
primary unit without degradation to any of the IFL System functions.
The IFL optical transmitter and receiver plug-in modules are capable
of supporting future applications of WDM technology and are configurable
to support Ku-Band satellite operations by exchanging the X-Band
optical receiver plug-in module, Model # 10350A, with the Ku-Band
optical receiver plug-in module, Model # 10350B. The IFL can also
support mixed mode satellite operations; that is, simultaneous X-Band
and Ku-Band operations. The IFL is delivered with a Windows based
RS-485, Monitor and Control System (MCS), capable of digital or
analog signal monitoring, performing manual or automatic control
sequences, and initiating alarms. The IFL System has capability
of automatic, emergency, and manual switch over, as well as the
ability to exercise all IFL System sub-component modules. These
prognostic features allow the system operator to maintain auxiliary
sub-component module operational readiness by identifying faults
in modules before they are requested as an essential back up thereby
increasing system availability.
Applications/Features
- Xband Uplink and Downlink
- Low Noise
- High Link Dynamic Range
- Imbedded Software Control
- 1U rack Mountable Formfactor
- Custom Configurations are Available
- 1 Year Full, 2 Year Limited Warranty
Specifications Highlight
(Refer to full functional article
for complete specs and application notes)
| RF Performance |
|
| Frequency Range |
0.1 to 18.0 GHz |
Amplitude Flatness
|
+/- 1.0 dB (max.) @ 7.0 to 9.0 GHz |
Input/Output Impedance
|
50 ohms |
| Input/Output VSWR |
1.35:1 (max.) @ 7.0 to 9.0 GHz |
| Input 1 dB Comp. |
>+13.0 dBm @ 7.0 to 9.0 GHz |
Max. RF Input Power
|
>24.0 dBm @ 7.0 to 9.0 GHz |
Input Third Order (IP3)
|
>+27.0 dBm @ 7.0 to 9.0 GHz |
Eq. Input Noise (EIN)
|
<-126.0 dBm/Hz @ 7.0 to 9.0 GHz |
| Noise Figure (NF)* |
<48.0 dB @ 7.0 to 9.0 GHz |
Spur Free Dynamic Range:
|
>+102.0 dB-Hz(2/3) @ 7.0 to 9.0 GHz |
| SNR @ 1 dB Comp. |
>+141.0 dB @ 7.0 to 9.0 GHz, 1Hz BW |
| * NF= +174 dBm/Hz + EIN dBm/Hz |
Optical Performance
|
|
| Wavelength Range |
1550nm +/- 6nm |
Output Opt Power
|
>7.0 dBm |
Rel Intensity Noise
|
<-155.0dBm/Hz |
Conn type
|
FC/APC |
Fiber
|
Single mode (9/125) micron |
| Operating Temperature |
Antenna Unit: -28°C to +65°C |
| |
Receiver Unit: 0°C to +50°C, |
| Storage Temperature |
-40°C to +71°C, Antenna & Receiver Unit |
| Vibration |
Mil-STD-167 |
Shock
|
Mil-S-901D |
Call
Us Toll-Free: (888) 868-8967
E-Mail Us: info@b2bphotonics.com
Home
| Products |
Services | Resources
| About MPS |
Contact Us | Site
Map |