Products
> Optical Link Modules
> MPS-5000TX
MP-5000TX:
Bidirectional Fiber Optic Modem
Description
The MP-5000TX is a RF/fiber optic Transmitter designed for antenna
remoting and broadband RF transmission applications using singlemode
fiber optic cable.
The transmitter uses a high efficiency Distributed Feedback(DFB)
laser diode with an operating wavelength selected from the ITU CWDM
or DWDM grid. The transmitter provides low noise and high dynamic
range performance over a wide operating temperature range. Temperature
stability is controlled with an integrated thermo-electric cooler
(TEC).
The transmitter provides status monitoring through the use of an
onboard processor that communicates with a host computer over an
RS-232 I/O interface. The I/O parameters include laser bias current,
temperature and alarm status. When the MP-5000TX RF/Fiber Optic
Transmitter is linked with the MP-5000RX 12 GHz RF/Fiber Optic Receiver,
the combination provides an excellent choice for your ultra-wideband
RF to Fiber Optic conversion applications. The MP-5000TX can also
be paired with the MP-2320RX to provide a high performance 3 GHz
link with 0.0 dB link gain.
Applications
- Ultra-Wideband RF Transmission
- Antenna Remoting
- SATCOM
- RADAR, EW & ECM
- Frequency & Timing Distribution
- Telemetry
- Ultra-Wideband, 1.0 MHz to 12 GHz
- High Dynamic Range
- Status Monitoring: RS-232 (opt)
- 1 Year Full, 2 Year Limited Warranty
Specifications
(Refer to the pdf downloadable spec sheet for full
specs)
Optical
|
|
Operating Wavelength
|
ITU CWDM or DWDM Grid |
Optical Output Level (min)
|
+3.0 dBm |
E/O Diff. Eff. (min)
|
0.1 W/A |
Line Width (3 dB)
|
10 MHz |
Side Mode Supression (typ)
|
45.0 dB |
|
|
RF Channel
|
|
Modulation Bandwidth
|
Model A: 1 MHz to 12 GHz
|
|
Model B: 100 MHz to 3 GHz
|
Flatness (max)
|
±2.0 dB
|
VSWR (max)
|
2.0:1
|
1 dB Comp. Level (min)
|
18.0 dBm(1)
|
Input IP-3 (min)
|
30.0 dBm(1)
|
Input Damage Level
|
20.0 dBm(1)
|
RF Link Gain (min)
|
Model A: -30.0 dB @ 1.0 dB Optical Loss(1) @ 12 GHz
|
| |
Model B: 0.0 dB @ 1.0 dB Optical Loss(2) @ 3 GHz
|
Noise Figure (max)
|
Model A: 45.0 dB @ 1.0 dB Optical Loss(1) @ 12 GHz
|
| |
Model B: 30.0 dB @ 1.0 dB Optical Loss(2) @ 3 GHz
|
Note (1): Overall link performance as measured
from RF Input/Output when linked with the MP-5000RX
|
Note (2): Overall link performance as measured
from RF Input/Output when linked with the MP-2320RX
|
Call
Us Toll-Free: (888) 868-8967
E-Mail Us: info@b2bphotonics.com
Home
| Products |
Services | Resources
| About MPS |
Contact Us | Site
Map |
