Products
> Optical Link Modules
> MPS-4235TRX
MP-4235TRX:
Bidirectional Fiber Optic Modem
Description
The MP-4235TRX is a compact fiber optic transceiver operating in
the 1310/1550 WDM wavelength band. The MP-4235TRX is configurable
with your choice of data protocol formats. The options include either
RS-232, RS-422 or RS-485 digital interfaces. The MP-4325TRX is specified
as a pair of complimentary wavelength pass band devices that function
in an end to end link for communications over one fiber allowing
for any two pieces of asynchronous serial equipment to communicate
full or half duplex over distances up to 20 km.
Each MP-4325TRX module consists of a Distributed Feed Back (DFB)
laser; Pin Photo-Diode (PIN) optical detector and a Wave Division
Multiplexing (WDM) thru port configured with a user specified optical
connector. The MP-4325TRX supports both the Transmit and Receive
data lines and all serial connections are provided on the same DB-9
female connector, while the single mode fiber is connected via FC/APC
connectors. The MP-4325TRX supports data signals rates of up to
128 Kbps. In addition to providing end-to-end optical link transmission,
the MP-4325TRX can be employed as a protocol converter allowing
a RS-232 signal transmitted from one end to be converted to RS-422
at the other end. This capability eliminates the need for additional
protocol converting hardware thus minimizing system architecture
support requirements.
Applications
- Status Monitoring
- Command Response
- Remote Multimedia Studio
- Remote Monitoring
- Media Retrieval
- Long-Distance Studio-to-Post Production Facility Links
Specifications
(Refer to the pdf downloadable spec sheet for full
specs)
| Digital Interface |
Digital Interface |
| Baud |
DC to 128 Kbps |
| Connector |
DB9 male |
Optical Connector
|
Diamond AVIM, FC/APC, User Specified |
Laser Wavelength
|
1310/1550 nm |
Indicators & Alarms
|
LED: DC Power Present |
| |
LED: RX Optical Power Present |
| |
LED: TX Optical Power Present |
| |
Pin8 of J1: Open Collector TX Power Fault = Low |
| |
Pin9 of J1: Open Collector RX Power Fault = Low |
| Storage Temperature |
-55°C to +85°C |
Operating Temperature
|
-40°C to +85°C |
| Vibration |
4 Hz to 50 Hz per MIL-STD-167 for mast mounted equipment |
Shock
|
9 Hammer Blows IAW MIL-S-901D, Type A, Grade A Class 1 |
Power Requirements
|
+12 Vdc / +5 Vdc (500 Ma max) factory selectable |
| |
|
| |
Call
Us Toll-Free: (888) 868-8967
E-Mail Us: info@b2bphotonics.com
Home
| Products |
Services | Resources
| About MPS |
Contact Us | Site
Map |
