Products
> Optical Link Modules
> MPS-2320RX
MP-2320RX: 3 GHz RF Analog
Fiber Optic Receiver
Description
The MP-2320RX is a comprehensive family of RF/Fiber Optic Receivers
that are designed to provide optical-to-electrical (O/E) conversion
of broadband RF signals over a frequency range of 1.0 MHz to 3.0
GHz. The receiver family is comprised of four model variants that
operate over a unique frequency range as indicated in the part number
generator tool on page two.
The utilization of the MP-2320RX, in conjunction with the appropriate
MP-2320TX RF/Fiber Optic Transmitter, forms a broadband link capable
of supporting the transmission of RF signals over singlemode optical
fiber for use in a wide array of communication applications. The
link applications include antenna remoting, time and frequency reference
distribution, RF delay lines, telemetry tracking, and point-to-point
RF transmission.
The receiver utilizes a high speed, low distortion PIN photodiode
detector that is integrated with a broadband RF post amplifier.
The unit provides the user with status monitoring through the use
of an onboard processor that communicates to a host computer over
an RS-232 or RS-485 I/O interface. The I/O parameters include received
optical power, temperature and alarm status. In addition, the receiver’s
post-amplifier gain can be adjusted using the integrated variable
RF attenuator. The attenuator’s adjustment range is 0.0 dB
to 35.0 dB in 0.5 dB increments. The receiver is also available
without a RF post amplifier.
Applications
- Wideband RF Transmission
- Antenna Remoting
- Trunking Radio
- L-Band SATCOM
- GPS
- Wireless/ PCS
Features
- WDM Compatible
- Wide Bandwidth, 1 MHz to 2250 MHz
- High Dynamic Range
- Low Noise Laser Diode
- RS-232 or RS-485 Data Port (opt)
- 1 Year Full, 2 Year Limited Warranty
Specifications Highlight
(refer to downloadable spec sheet for full spec)
| OPTICAL |
|
| Operating Wavelength |
1200 nm to 1600 nm |
| Input Level (Max) |
+5 dBm |
| Responsivity (min) |
0.85A/W@1310 nm, 0.90 A/W @ 1550 nm |
| Input Backreflection |
-55dB to -63 dB |
| Opt Fault Threshold |
Factory preset to -12 dBm |
| RF Channel |
|
| Bandwidth |
1 MHz to 3000 MHz |
| Gain (min) |
28.0 dB |
| Flatness (max) |
± 1.0 dB |
| 1 dB Comp. Level (min) |
18.0 dBm |
| OIP-3 (min) @ 2x0 dBm |
28.0 dBm |
| Noise Figure (max) |
3.0 dB |
Call
Us Toll-Free: (888) 868-8967
E-Mail Us: info@b2bphotonics.com
Home
| Products |
Services | Resources
| About MPS |
Contact Us | Site
Map |
